- Messages
- 2
I plunged each side of sink up top... disconnected trap below and ran water from each side. Water ran out fine so problem not here.
I ran a 3 to 4 ft snake down pipe going into wall under vent and no blockage. My problem is when i start to run sink water backs up and out the Proflo vent seen in picture.
Any advice? Is it a gravity (vacuum) issue or is the clog lower in the pipe under vent going into wall??
Thanks,
Huddle
I ran a 3 to 4 ft snake down pipe going into wall under vent and no blockage. My problem is when i start to run sink water backs up and out the Proflo vent seen in picture.
Any advice? Is it a gravity (vacuum) issue or is the clog lower in the pipe under vent going into wall??
Thanks,
Huddle