Kitchen tap leaver coming loose

[ColdEagle]

Hello,
Hopefully this will be an easy one, my kitchen tap's cold lever handle is coming loose / moving along.
I can't figure out how to tighten it back to where it was, or how to "open / remove" it to see what needs tightening. I can't feel any sort of screw on the outside casing (unless I'm missing something), so i'd imagine I'd need to access something by maybe removing a part to secure it back in place?
I honestly have no idea so am just guessing. Any help would be greatly appreciated. Many thanks

Its the cold on the right in the pic below:
Imgur

 

[ShaunCorbs]

There's a cover in the end of the handle (normally where the c or h is) this normally unscrews and you will see the screw for the handle there

 

[ColdEagle]

There's a cover in the end of the handle (normally where the c or h is) this normally unscrews and you will see the screw for the handle there

Brilliant, I'll have a look in a bit, will report back if I get stuck.

 

[steadyon]

Gives a whole new meaning to "thanks in anticipation".

 

[ColdEagle]

Gives a whole new meaning to "thanks in anticipation".

Oh I'm sorry I didn't mean to sound like that.
@ShaunCorbs I really meant thank you with my "brilliant", sorry.
I knew I couldn't check immediately but wanted to reply as you were kind enough to respond.
I really didn't mean to offend anybody.

 

[ShaunCorbs]

no worries and we're all busy so it's understandable we can't do things straight away etc

 

[steadyon]

My comment in post #4 wasn't aimed at anyone, just a poor attempt at a bit of humour.

 

[ColdEagle]

@steadyon @ShaunCorbs - just wanted to report back that the tap was a success, unscrewed really easily and screwed in nicely. it might shift later on but given how easily it was to do for now i am very happy! thanks