Knee operated valve | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Knee operated valve in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Neil T

Esteemed
Plumber
Subscribed
Messages
205
Hi, can anyone point me to a supplier of these valves please. They are from a knee operated trough/sink and the washers have gone. Can't source the washers or valves for love nor money. Any help would be appreciated. The actual sink has no manufacturers mark so can't go down that route :(
Thanks
 

Attachments

  • 20160422_103407.jpg
    20160422_103407.jpg
    87 KB · Views: 41
  • 20160422_103815.jpg
    20160422_103815.jpg
    84.9 KB · Views: 36
  • IMG_8740.jpg
    IMG_8740.jpg
    37.8 KB · Views: 39
Can't you just replace the whole valve ?
 
Will send pics over to shower doc, cheers. Can't find exact valve anywhere as it works by a hinged box (can see in background on pic) and all i can find are lever and button ones. Don't even know manufacturer of sink as there is no stamp
 
Looks like a catering set up by your pic's try www.mechline if you cannot find it there phone thier tech dep who might put you onto someone who can help found them helpful in the past good luck .....regards Turnpin:smile:
 
Status
Not open for further replies.

Similar plumbing topics

Thanks All. After much persuasion the...
Replies
5
Views
569
J
    • Like
  • Question
Hi, did you ever solve this problem? You...
Replies
1
Views
628
the op says no water in prv balloon so not prv...
Replies
7
Views
1K
Would cap both off separately cut just below...
Replies
1
Views
461
C
Do you have a water meter? If so, you can use...
Replies
2
Views
648
Back
Top