L2 logic heat 12 | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss L2 logic heat 12 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
7
Attended job today on logic heat 12, l2 fault code. 240v present at spark gen and electrodes in decent condition. Replaced spark gen and electrodes but still getting l2. Earth fine on electrodes and continuity ok through spark lead. Also tried different spark gen incase faulty but still no spark. Even if continuity is ok on lead could this still cause issue.
 
Good evening mate. You need to PM @ShaunCorbs your gas details for him to get you access to the correct areas of the forum. We cannot give gas related advice on an open forum. Sorry I’m advance.

Please like this post if you found it helpful.
 

Similar plumbing topics

Tell your engineer to check the rectification...
Replies
1
Views
2K
Deleted member 120897
D
Thanks some good ideas. Just as an aside if we...
Replies
10
Views
2K
Thanks, will buy spare electrode and pcb first...
Replies
8
Views
202
W
Hi cjg, thanks for the reply. It was serviced...
Replies
2
Views
1K
Williams25
W
    • Like
Set of new electrodes should sort it. Had a...
Replies
15
Views
4K
Back
Top