Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,128 Jun 2, 2019 #1 Any idea on the value of scrap lead at the moment?
ShaunCorbs Super Moderator Staff member S. Mod Plumber Gas Engineer Subscribed Messages 34,708 Solutions 1 Jun 2, 2019 #2 not much around the same as copper per k
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,128 Jun 2, 2019 #3 ShaunCorbs said: not much around the same as copper per k Click to expand... Oh I thought it would be much less than copper
ShaunCorbs said: not much around the same as copper per k Click to expand... Oh I thought it would be much less than copper
ShaunCorbs Super Moderator Staff member S. Mod Plumber Gas Engineer Subscribed Messages 34,708 Solutions 1 Jun 2, 2019 #4 scott_d said: Oh I thought it would be much less than copper Click to expand... went a month ago with a few lead water mains ofcuts and slates got around £30
scott_d said: Oh I thought it would be much less than copper Click to expand... went a month ago with a few lead water mains ofcuts and slates got around £30
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,128 Jun 2, 2019 #5 ShaunCorbs said: went a month ago with a few lead water mains ofcuts and slates got around £30 Click to expand... I will hopefully have a van full this week
ShaunCorbs said: went a month ago with a few lead water mains ofcuts and slates got around £30 Click to expand... I will hopefully have a van full this week
ShaunCorbs Super Moderator Staff member S. Mod Plumber Gas Engineer Subscribed Messages 34,708 Solutions 1 Jun 2, 2019 #6 scott_d said: I will hopefully have a van full this week Click to expand... beers on you then for the next two weeks
scott_d said: I will hopefully have a van full this week Click to expand... beers on you then for the next two weeks
SimonG Esteemed Plumber Subscribed Messages 21,026 Jun 2, 2019 #7 Last time it was only pound a kilo.
Last Plumber Esteemed Plumber Gas Engineer Subscribed Messages 4,859 Jun 3, 2019 #9 £1100 around here in May 19. (£1-10 Per Kg).
W WaterTight Esteemed Plumber Subscribed Messages 5,433 Jun 3, 2019 #10 which church are you robbing?
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,128 Jun 3, 2019 #11 WaterTight said: which church are you robbing? Click to expand... Top secret It’s the old lead gas and MCW to be removed.
WaterTight said: which church are you robbing? Click to expand... Top secret It’s the old lead gas and MCW to be removed.
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,128 Jun 7, 2019 #12 Phoned round a few and the best us £1.10 for lead, going tomorrow
P Phil Plumbers Arms member Plumber Messages 4,236 Jun 7, 2019 #13 I've just weighed in my scrap, its about 3 years worth £1050 I had a wheelie bin full of taps which was so heavy I couldn't shift it and loads of builders tubs of mixed and clean copper.
I've just weighed in my scrap, its about 3 years worth £1050 I had a wheelie bin full of taps which was so heavy I couldn't shift it and loads of builders tubs of mixed and clean copper.
B Ben-gee Esteemed Plumber Subscribed Messages 3,198 Jun 7, 2019 #14 Nice one Phil! Round here it is all bank transfer now, so taxman can get his hands on it, however all the office tossers have their made up expenses - not fair.
Nice one Phil! Round here it is all bank transfer now, so taxman can get his hands on it, however all the office tossers have their made up expenses - not fair.
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,128 Jun 8, 2019 #15 I had 178kg of lead Probably one of my heaviest scrap weigh ins, shame it’s not worth any where near copper
I had 178kg of lead Probably one of my heaviest scrap weigh ins, shame it’s not worth any where near copper
W WaterTight Esteemed Plumber Subscribed Messages 5,433 Jun 8, 2019 #16 Do you need to do anything with the taps or do you just hand them over handles, gunk on threads and all?
Do you need to do anything with the taps or do you just hand them over handles, gunk on threads and all?
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,128 Jun 8, 2019 #17 WaterTight said: Do you need to do anything with the taps or do you just hand them over handles, gunk on threads and all? Click to expand... Smash off handles and remove flexis
WaterTight said: Do you need to do anything with the taps or do you just hand them over handles, gunk on threads and all? Click to expand... Smash off handles and remove flexis
Harvest Fields Esteemed Plumber Gas Engineer Subscribed Messages 10,441 Jun 8, 2019 #18 scott_d said: Smash off handles and remove flexis Click to expand... Why smash off handles?
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,128 Jun 8, 2019 #19 Harvest Fields said: Why smash off handles? Click to expand... I thought I typed plastic handles Missed a word
Harvest Fields said: Why smash off handles? Click to expand... I thought I typed plastic handles Missed a word