Leaking Hansgrohe Bar Shower

[JohnJoseph]

How do I get access to the flow cartridge in the Hansgrohe Bar Shower. It has the control with the 50% mark on the flow side. See attached photo - the end piece pops off but hard to see whether the small button should also come off to slide off the cover and reveal the cartridge

 

[ShaunCorbs]

There will be an screw in the end cap

 

[JohnJoseph]

Doesn't look like a screw. Will that just remove the cover or the whole cartridge?

 

[ShaunCorbs]

Will remove the handle / control then you will have access to the cartridge

 

[JohnJoseph]

Will remove the handle / control then you will have access to the cartridge

Thanks. I have a combo boiler - so if I turn off the cold at the main switch should that stop all hot and cold water?

 

[ShaunCorbs]

Yes but you don’t need to do that yet only when you remove the cartridge (just before)

 

[JohnJoseph]

Yes but you don’t need to do that yet only when you remove the cartridge (just before)

Thanks

 

[JohnJoseph]

So the screw came out no problem but the handle hasn't come off.

 

[ShaunCorbs]

Have you tried giving it a pull ?

 

[JohnJoseph]

Have you tried giving it a pull ?

I'll try that but it doesn't seem to want to move

 

[JohnJoseph]

Is it possible that the push button on the side comes off and there is a grub screw behind? Or is the pin that is just visible in the photo something that has to move because the cover does not want to move.

 

[Ben-gee]

Is that the flow handle you are playing with?

The thermostatic cartridge is the other end!!!

Flick off the end cap and remove the Allen screw that allows the handle to pull off and reveals the cartridge.

If you need a replacement it is almost certainly 98282000.

 

[JohnJoseph]

Is that the flow handle you are playing with?

The thermostatic cartridge is the other end!!!

Flick off the end cap and remove the Allen screw that allows the handle to pull off and reveals the cartridge.

If you need a replacement it is almost certainly 98282000.

It is the flow cartridge that is the problem. I've removed the end piece and the allen screw but the handle won't move or come off.

 

[JohnJoseph1]

It is the flow cartridge that is the problem. I've removed the end piece and the allen screw but the handle won't move or come off.

Still looking for inspiration for this simple haha problem

 

[Ric2013]

I'm suspecting there's a metallic insert in the plastic handle handle that has seized onto the splines. Plusgas and patience? But being plastic, any force required to remove (even a bit of stern wiggling) may end up damaging the handle. Does the cartridge come with a new handle?

 

[Ben-gee]

Your picture on post 11 seems to show a small retaining screw inside the handle, about 5 o’clock position, try undoing that.

 

[Basher]

The handle/ knob is supposed to pull off. More force needed!
if you break it you can still buy a replacement, eg:

Hansgrohe Handle For Ecostat 1001 SL Thermostatic Mixer for Exposed Installation Chrome 96618000

Hansgrohe Handle For Ecostat 1001 SL Thermostatic Mixer for Exposed Installation Chrome 96618000 Finish Chrome At Bathroom Spare Parts We carry

www.bathroomspareparts.co.uk

 

[eaglegut]

Still looking for inspiration for this simple haha problem

Hello John, I have exatcly the same problem as you. Did you solve the problem since 2021 ? ^^

 

[freturetechno]

Hard water stains, mildew, and mold can damage grout, tiles, and fixtures, leading to costly repairs and renovations