Leaking Heated Towel Rail | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Leaking Heated Towel Rail in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
R

Russ

Marvellous heated towel rail, never gone wrong in forty years - just blead it once a year. The four very large nuts holding a central panel to for rails have begun to leak, maybe because they got a bit of knock by the bathroom fitter. He tried tightening the nuts (prob 30mm or more) but it didn't help. A new one similar is about £700 - will that Spray'n'Seal stuff be any good or should I just call a plumber to sort out the nuts?

Thanks,

Russ
 
Yes,if you get a plumber in he will be able ti isolate radiator undo nuts and put some jointing compound on the joints and re-tighten leaving all sound
'The spray and seal stuf'will not help
 
do you not think that you have had your money's worth out of a 40 year old radiator????
 
Thank you all - I got a plumber to loosen the nuts and apply some sealant which sorted it out in half an hour for £70.

Russ
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Yes, when I did the heating system I did the...
Replies
2
Views
1K
R
  • Locked
Buy a better quality valve with a spindle...
Replies
5
Views
6K
    • Like
From this post, I think you’ve got a good...
2
Replies
47
Views
6K
  • Locked
Yes, thanks - was thinking something along...
Replies
11
Views
2K
  • Locked
How many pipes do you have going to the rads...
Replies
4
Views
868
Back
Top