Leaking magnetic filters...

[mutley racers]

Has anyone come up with a good way of stopping these weeping when they have been serviced but with no new seal. Too many to carry around a seal for all of them.

I have one to go to today which I have not heard of. It is called instinct eco mag. Cannot get a replacement o'ring in time. Cheera

 

[Scott_D]

Silicon grease?

 

[Stu-B]

The eco mag comes with spare seals in the box, a good guy would leave them with the householder.

 

[ShaunCorbs]

What one you found leaking as I haven’t seen a leaky pro 2 yet or the old red sticker

 

[mutley racers]

Thanks all.

 

[mutley racers]

What one you found leaking as I haven’t seen a leaky pro 2 yet or the old red sticker

Not seen it yet as client called last night.

 

[king of pipes]

Plumbcity own brand they carry spares as above silicone grease the rubber seal . Kop

 

[Sharp Point]

Not seen it yet as client called last night.

View attachment 38736

Lol.... isn’t that one that rob foster was involved with designing?

Nuff sed

 

[Millsy 82]

The eco mag comes with spare seals in the box, a good guy would leave them with the householder.

No they dont they keep hold of them so when they go back they have a replacement if they dont get called back for the service it's someone else's problem mwah ha ha!

 

[Millsy 82]

Not seen it yet as client called last night.

View attachment 38736

Looks like a mag one.

A lot of the cheaper brands are all the same just different names on the side.

 

[mutley racers]

Was the top middle part that was leaking. New O'ring on it and now it's all good.

 

[OffshoreGas]

You can but o ring material in 5m lengths quite cheap, simply cut the length you required and glue with cyanoacrylate glue. They even do a little jig for cutting them.

Metric Black Rubber O Ring Material - Sold Per Metre - 1.4mm To 8.4mm Thickness | eBay

 

[mutley racers]

You can but o ring material in 5m lengths quite cheap, simply cut the length you required and glue with cyanoacrylate glue. They even do a little jig for cutting them.

Metric Black Rubber O Ring Material - Sold Per Metre - 1.4mm To 8.4mm Thickness | eBay

Well I never!

 

[OffshoreGas]

Well I never!

I wouldn’t use for gas obviously or anything high temperature.

Alternatively if you’ve got a oring that’s too big you can cut a bit out of the length and glue.

 

[Rob Foster]

Lol.. isn’t that one that rob foster was involved with designing?

Nuff sed

No, Not mine.

 

[Twinkle22]

Was the top middle part that was leaking. New O'ring on it and now it's all good.

Can I ask where you got the new O ring from to fix the leaking Instinct Eco-Mag and what size you used.
Thanks

 

[mutley racers]

Can I ask where you got the new O ring from to fix the leaking Instinct Eco-Mag and what size you used.
Thanks

Hi. From an O ring set I had on the van if I remember correctly..

 

[Twinkle22]

Do you remember the size of the O ring you used by any chance?
Thanks

 

[mutley racers]

Do you remember the size of the O ring you used by any chance?
Thanks

I am afraid not. Sorry

 

[centralheatking]

Lol.. isn’t that one that rob foster was involved with designing?

Nuff sed

ha ha no it was not. centralheatking

 

[mutley racers]

Sorry to post on this thread. Anyone know if you can get a tee with spigots on both ends to put in here... a slip tee?

 

[ShaunCorbs]

Sorry to post on this thread. Anyone know if you can get a tee with spigots on both ends to put in here... a slip tee?

Like this ??

Double Socket Short Boss Pipe Connector 110 x 63mm | Plumbing Superstore®

For the disposal and distribution of waste water. Double socket short boss pipe connector 110 x 63mm.PVCu material.110mm soil.For above ground.

www.jtmplumbing.co.uk

You have a fernco so should need a slip as I bet you that’s a male tee (no socket)