- Messages
- 8
Hello I wanted to fit an isolating valve to the supply to the toilet cistern so as to reduce the water pressure. The cistern has a shutoff valve with a small rubber diaphragm type shut off and if pressure is to high it keeps filling and overflows into toilet.
I have posted a photo, new copper pipe cut with pipe cutter and some ptf tape on thread. I put a bit extra on pipe that comes out of cistern as its plastic and it was leaking without the extra tape. It is still leaking and I am hoping some one can tell me what would be best type of fitting to use to get a proper connection onto the cistern pipe.
I know of flexi connectors but don’t know what size type would be best. Any help much appreciated. Thank You