leakng mixer shower.

[anon73]

Hi all.
I have a leaking mixer shower at home. After some research i probably need to replace the cartridge.
It is an aqualiser shower, dont know what type but the house was built in 2000 ,only looks like a basic model. How do i start to strip it to get to the cartridge. No screws on the front knob so how do i take it off. Does it just slide off?

Any help would be great sa my water meter is getting dizzy its going round that much.

Cheers

 

[Best]

The cover probably pulls off, but be careful there is not a piece in centre of the nob that you remove to get at a screw.
The cartridge is held on with 4 bolts & the only hard bit is removing & replacing an internal O ring.
Take a look online at Showerdoc to see if you identify what model you have & you can get advice.
Make sure you get the correct new cartridge, as some are for combi systems.

 

[anon73]

Cheers Best.
Been away for a couple of days, hence the long reply time.
Will have a look today.

Again cheers