Leaky tap. How does the cartridge come out?! | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Leaky tap. How does the cartridge come out?! in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
1
Hi all,


Super novice question - but I how do get this cartridge out? The tap is leaking from the base (under the sink). I was going to see if replacing the o-rings does the trick but I can't seem to get the retainer nut thing out as there isn't a bolt on top of the tread like I've seen in every other tap and I don't want to force it.


Is it removed from the bottom when the whole tap comes off?


Thanks in advance!

tap_02.jpg
tap.jpg
 
Thin jawed adjustable in the gaps, then use another adjustable on that to unscrew it
 
Whats the tap make & what hot water system do you have? There's reason for the Qs.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
For future reference, you’re best off with a...
Replies
7
Views
1K
  • Question
Hi, there is no grub screw. I have attached...
Replies
6
Views
427
  • Question
For £60 ish quid might be best just to replace...
Replies
3
Views
1K
  • Question
Does the tap leak continuously or only when...
Replies
2
Views
666
  • Question
Unscrew the lever. This might enable removal...
Replies
1
Views
810
Back
Top