- Messages
- 14
Afternoon all,
First post (after my introduction) and looking for some assistance, if possible.
We have a Living Flame Gas Fire by Legend Gas Fire Ltd. Just at the wrong time of year it has started to cut-out. To my (untrained) knowledge this is likely to be the thermocouple or pilot unit. Scottish Gas engineer arrived today and says he can't work on it without the installation manual. To me this seemed a little extreme but he is the expert; unfortunately we don't have an installation manual for the fire and "Legend Gas Fires" have just gone off on Xmas holidays.
Any idea if I could get hold of the installation manual for the following:
Supplier: Legend Gas Fire
Trade name: Heritage
Pin: 63AR5147
Serial Nos. 57024
Injector: 421
I've tried Google, without success, so have registered on here.
Any assistance would be appreciated.
Cheers
First post (after my introduction) and looking for some assistance, if possible.
We have a Living Flame Gas Fire by Legend Gas Fire Ltd. Just at the wrong time of year it has started to cut-out. To my (untrained) knowledge this is likely to be the thermocouple or pilot unit. Scottish Gas engineer arrived today and says he can't work on it without the installation manual. To me this seemed a little extreme but he is the expert; unfortunately we don't have an installation manual for the fire and "Legend Gas Fires" have just gone off on Xmas holidays.
Any idea if I could get hold of the installation manual for the following:
Supplier: Legend Gas Fire
Trade name: Heritage
Pin: 63AR5147
Serial Nos. 57024
Injector: 421
I've tried Google, without success, so have registered on here.
Any assistance would be appreciated.
Cheers