S
supper plumb
Had to fit a Tee washing mashing machine valve for our new dish washer.
had a look at the pipes easy install all of 15min.
turn offf mains water and boiler drain off cold pipe run cut and clean tails with blow torch as thay was painted and fit valve. And guess what NO PTFE at all only couple of turns on the end for the blanking nut just in case little fingers play with the tap lol. turn water on then look for leaks tools away now its beer oclock
jobs sweet as a nut :hurray:
had a look at the pipes easy install all of 15min.
turn offf mains water and boiler drain off cold pipe run cut and clean tails with blow torch as thay was painted and fit valve. And guess what NO PTFE at all only couple of turns on the end for the blanking nut just in case little fingers play with the tap lol. turn water on then look for leaks tools away now its beer oclock
jobs sweet as a nut :hurray:
Last edited by a moderator: