- Messages
- 6
HI all, this is my 1st post. I have a Concord CX 60 boiler, very simple and reliable boiler which occasionally presents a lock out. I'm fed up.of having to deal with Gas Safe approved individuals whose only training in diagnosis and fault finding is to rebuild the boiler by replacing parts until the issue is fixed. With the customer paying for the unnecessary parts and the additional time the engineer charges as a result of his own slap dash approach.
I am seeking an engineer who prides himself on fault finding and whose first thought is to reach for the multimeter and U gage to check items such as the standing pressure to gas valve, main boards, the power supply, the potentiometer, the t/c, loom from valve, the immersions in cylinders, the wiring centre etc instead of just guessing, (albeit an educated guess) that you need a new gas valve, o/heat stat etc when they just don't know what the issue really is.
I am looking for an engineer to fix a current lock out issue at a reasonable rate who will then be my engineer of choice for all future needs other jobs available. If this sounds like it could be for you, the job is in N17 8HH and I look forward to hearing from you.
I am seeking an engineer who prides himself on fault finding and whose first thought is to reach for the multimeter and U gage to check items such as the standing pressure to gas valve, main boards, the power supply, the potentiometer, the t/c, loom from valve, the immersions in cylinders, the wiring centre etc instead of just guessing, (albeit an educated guess) that you need a new gas valve, o/heat stat etc when they just don't know what the issue really is.
I am looking for an engineer to fix a current lock out issue at a reasonable rate who will then be my engineer of choice for all future needs other jobs available. If this sounds like it could be for you, the job is in N17 8HH and I look forward to hearing from you.