Looking for a specific flow meter for UFH manifold

[Akhdog]

Hi. I need to get a replacement flow meter as one has split and is leaking. I can’t seem to find the specific one and can’t see a maker on it. Does anyone know where to get one, what it is or any alternatives? Thanks.

 

[exedon2]

Any maker's name on manifold?
Clear picture of manifold would be useful.

 

[snowhead]

Looks fairly similar, may have been updated slightly;

Flow Meter

<p><strong><span style="font-size: medium;">Replacement Rifeng Flow Gauge M20 thread with seating tail</span></strong></p>

www.underfloorheatingtradesupplies.co.uk

 

[Akhdog]

Any maker's name on manifold?
Clear picture of manifold would be useful.

Couldn’t find a name. Here’s a picture. Will take a better one once I’m home again. Appreciate your help.

 

[exedon2]

Some writing on actuator heads?
Manifold looks Italian unfortunately a number of companies that made/imported this type of equipment have disappeared gone out of business.
We have already had to change several Manifolds because of lack of spares.

 

[Akhdog]

Here’s a picture of the actuator heads. On the pipe, it says rifeng. Does that help?

 

[exedon2]

You may be in luck rifeng did make manifolds search for them?

 

[Akhdog]

I fear no luck. They have gone bust. Can’t get spares. Apparently I’ll need 2 new manifolds- too and bottom bars, and maybe the pumps too. Do you know any good underfloor heating experts in Manchester by any luck?! You have been so helpful. Thanks.

 

[ShaunCorbs]

The one snow linked should work

 

[Akhdog]

I’ll send for one but the one I need has an M18 thread and is plastic at the top whereas this is M20 and brass??

 

[ShaunCorbs]

Sorry to say your screwed then

 

[ShaunCorbs]

Might be worth asking these do they have something similar?

Taconova / Uponor SPI FLOWMETER for HTG – TM Manifold – 1002381 – Underfloor Parts

underfloorparts.co.uk

 

[Akhdog]

Thanks- I phoned them today! They are sending a part but they don’t think it will fit. They think I will need to change the whole manifold- too bad and bottom.

 

[Amanda A]

Here’s a picture of the actuator heads. On the pipe, it says rifeng. Does that help?