Looking for this type valve

[Will_D]

Hi all, Hope you can help me out.

I need to source a number of these valves:

Basically its a push button type that allows a flow of gas. A bit like the old fashioned brass blow-down guns. I have found a modern blow gun that would work but would prefer this simple valve.

It is about 5 cms long and is threaded 1/4" bsp or so ( as is American its actulally and NPT size ! )

The tread is not overly important but its "push the button to squirt the" gas is!!

If any one can steer me in the direction of a link then would be most grateful.

Cheers

Will

 

[snowhead]

What gas?

 

[Howsie]

Can't you source direct from the US?

 

[Dotty]

can it be legally used in this country?

 

[mike-c]

Are you trying to build a flamethrower?

 

[Dotty]

great. more tea over my monitor!

Thanks Mike!

 

[ecowarm]

Gas? or compressed air

 

[Will_D]

Gas is CO2 at about 10 psi. Its for filling beer bottles ( called a counter-pressure bottle filler - like what the big boys use )

Maybe able to source in USA but then ther's postage and customs to consider.

( I did like the discovery channels gun-smith program about the flame throwers mounted on a truck - just to compare Napalm FF versus the Petrol/Diesel mix )

Now this post will probably set off the alarm bells in the Pentagon and GCHQ ( Oops - just done it again )

Will

 

[REDSAW]

Are you trying to build a flamethrower?

lollolololol

thats what i was thinking

 

[REDSAW]

same as this really.......

[DLMURL="http://www.powerfit.co.uk/epages/ny33m8en93tj.sf/en_GB/?ObjectPath=/Shops/ny33m8en93tj/Products/PREVOST_PCL/SubProducts/PREVOST_PCL"]QUICK RELEASE SAFETY COUPLINGS ONE PUSH PCL BRITISH TYPE - POWERFIT[/DLMURL]