Hi all, I have just popped over from the electricians forum hoping to get some help. I have a swan neck style mixer tap on a kitchen sink on a gravity fed system that was fitted about 6 months ago. The cold water flow is fine but the hot water has slowed down by about half. I have removed the swan neck from the body and this seems to be free of any obstructions, the inline service valve under the sink (screw driver slot type) is in the fully open position. Does anyone have any ideas and if I were to connect a pressure guage to the hot supply what pressure should I expect to see. There are no other taps down stairs so I cant compare the pressure to confirm wether its the tap or a supply problem.
Many thanks.
Many thanks.