Low pressure bar - Baxi 105e | UK Plumbers Forums | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Low pressure bar - Baxi 105e in the UK Plumbers Forums area at Plumbers Forums

Messages
11
Hi all ,

just looking for a little bit of help with this if possible. My boiler is showing low pressure and after watching countless videos and reading other threads I’m still stuck on what I should be touching or if I’m missing a fill pipe and that’s why or whether the taps are there and I can just do it. I have attached a pic of my set up.
Thanks in advance.
 

Attachments

  • C9207443-54C2-4778-8DA1-B80330B76FEC.jpeg
    C9207443-54C2-4778-8DA1-B80330B76FEC.jpeg
    85.4 KB · Views: 35
  • C4C8C567-EA2F-49BD-9ABE-682C4F7E4417.jpeg
    C4C8C567-EA2F-49BD-9ABE-682C4F7E4417.jpeg
    87 KB · Views: 33
Turn these 2 knobs and the pressure will rise. Do them slowly. They turn quite a lot before the pressure starts to fill. Then turn them all the way back.
 

Attachments

  • 57EDDD89-4E5F-4738-A378-A568987DD325.jpeg
    57EDDD89-4E5F-4738-A378-A568987DD325.jpeg
    56.2 KB · Views: 28

Similar plumbing topics

  • Question
Yes as they don’t seal after they’ve chucked...
2 3
Replies
54
Views
4K
  • Question
Okay thank you! I’ve taken both of pieces of...
Replies
4
Views
1K
N
  • Question
I doubt it’s pressure and more of a flow...
Replies
1
Views
1K
Deleted member 120897
D
P
  • Question
The expansion vessel should be on the cold...
Replies
4
Views
1K
  • Question
Assuming the pressure rises with the system...
Replies
2
Views
1K
Back
Top