LPG Rangmaster cooker | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss LPG Rangmaster cooker in the Plumbing Jobs | The Job-board area at Plumbers Forums

Harvest Fields

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
10,441
Morning all. I have a custard that wants one of these disconnected. I know I cannot do it as I’m only g20 and not LPG. My question is this.
Can he disconnect himself if on a bayonet fitting? Like with G20.

Maybe a silly question but never been asked before.

Thanks in advance?
 
Morning all. I have a custard that wants one of these disconnected. I know I cannot do it as I’m only g20 and not LPG. My question is this.
Can he disconnect himself if on a bayonet fitting? Like with G20.

Maybe a silly question but never been asked before.

Thanks in advance?
If it's staying out it would be better being plugged permanent.
Is he leaving it out?
 
Appreciate your advice mate. That’s not me though. I do everything by the book.

So do I.
Don't get me wrong, I wouldn't go and carry out an LPG installation at the moment without the ticket but something like that I probably would look at it that it would be safer than leaving it on a bayonet.

I did have LPG and still hold everything else including ticket that covers LPG Commercial pipework.
I was only speaking for myself in my position.

The right way is for him to pay an LPG person to come and cap it.
 
So do I.
Don't get me wrong, I wouldn't go and carry out an LPG installation at the moment without the ticket but something like that I probably would look at it that it would be safer than leaving it on a bayonet.

I did have LPG and still hold everything else including ticket that covers LPG Commercial pipework.
I was only speaking for myself in my position.

The right way is for him to pay an LPG person to come and cap it.
Cheers mate. Was just double checking. No offence intended on my post above.
 
Not 100% sure about LPG, but for Nat Gas, they are considered suitable for a permanent disconnection. Rightly or wrongly.

As you will no doubt know Firemant, there are lots of things considered to be OK by the 'powers that be' but are actually a stupid idea when a bit of thought and common sense is applied.
I can obviously only speak for myself here but a spring loaded valve is not good enough for permanent disconnection. What other people do is entirely up to them of course.
I have seen a number of those leak whilst disconnected.
 
Fully agree Last. But this is a 1 out 1 in next day on a house move. However. I wouldn’t do it.

I would still cap it.
If it's capped, it is completed.
If someone else comes along after, they can do what they like.
I wouldn't leave it ready for someone to 'plug in' a Gas appliance.
They should have their own appliance fitted and commissioned in the new premises by a registered installer.
That way, should there be any leaks on their appliance or faults with it, then the registered installer will find them.
It also ensures that the new people don't bring a Natural Gas appliance and plug that in by accident.
It's safer to leave it so that nothing has anything to do with you or how you left it, in any way whatsoever.
In my opinion.
 
Last edited:
I would still cap it.
If it's capped, it is completed.
If someone else comes along after, they can do what they like.
I wouldn't leave it ready for someone to 'plug in' a Gas appliance.
They should have their own appliance fitted and commissioned in the new premises by a registered installer.
That way, should there be any leaks on their appliance or faults with it, then the registered installer will find them.
It also ensures that the new people don't bring a Natural Gas appliance and plug that in by accident.
It's safer to leave it so that nothing has anything to do with you or how you left it, in any way whatsoever.
In my opinion.
You know I agreed with your statement above right? I am not touching it.
 
Get it disconnected and plug of with one off these as Shaun said . Kop

Screenshot_20181112-204504.png
 

Similar plumbing topics

Thanks Shaun Much appreciated
Replies
2
Views
351
If he's cautious, the plumber will want to...
Replies
3
Views
821
Ok I think I see what your saying mate, So...
Replies
9
Views
1K
No, nothing to see at the back. Whole fitting...
Replies
5
Views
842
Back
Top