1
1807mick
Hello, system - gas fired back boiler heating indirect cylinder, no zone valves, gravity fed.
Problem - Hot water barely gets warm.
I have checked pipes to cylinder and both flow and return are hot but cylinder is only warmish.
Checked header tank and it is full.
Boilers fires up stays on for a few minutes then switches off, it fires up again after several minutes then switches off. This cycle repeats but the boiler stays on for less time and switches off quicker than at first.
You might have gathered I'm a competent DIYer but cant fathom this, help from any of you professional guys would be much appreciated as had views of a plumber who could only suggest a blockage in the cylinder coil. Thank you - Mick
Problem - Hot water barely gets warm.
I have checked pipes to cylinder and both flow and return are hot but cylinder is only warmish.
Checked header tank and it is full.
Boilers fires up stays on for a few minutes then switches off, it fires up again after several minutes then switches off. This cycle repeats but the boiler stays on for less time and switches off quicker than at first.
You might have gathered I'm a competent DIYer but cant fathom this, help from any of you professional guys would be much appreciated as had views of a plumber who could only suggest a blockage in the cylinder coil. Thank you - Mick