Hi all
I want to install a MagnaClean on the boiler return and having looking at it closely I see a valve just above where it would best fit and a drain off at the bottom of the return pipe as it heads into the boiler. On he flow pipe there is another stop valve.
I would obviously switch everything off before starting but are there any potential dangers if I was to shut both valves and use the drain off to take out the water in the pipe? I didn't know if the boiler needed to be primed or anything again after or if I would just get away with opening the valves again, running the system and the bleeding the radiators.
Appreciate your advise.
Cheers
I want to install a MagnaClean on the boiler return and having looking at it closely I see a valve just above where it would best fit and a drain off at the bottom of the return pipe as it heads into the boiler. On he flow pipe there is another stop valve.
I would obviously switch everything off before starting but are there any potential dangers if I was to shut both valves and use the drain off to take out the water in the pipe? I didn't know if the boiler needed to be primed or anything again after or if I would just get away with opening the valves again, running the system and the bleeding the radiators.
Appreciate your advise.
Cheers