Main Combi 30 he boiler

[Jacko]

Hello All
I had a fault on the above boiler the 30 and 50 lights were flashing. I replaced the pcb and all was working however the customer has reported that now the 30 and 40 lights flash, this can be reset and the boiler operates but intermittently locks out with 30 and 40 lights flashing again... help

 

[Harvest Fields]

Are you Gas Safe Registered? If so please Pm either @Harvest Fields @Riley or @ShaunCorbs with your id and Gas Safe number.

 

[Jacko]

Are you Gas Safe Registered? If so please Pm either @Harvest Fields @Riley or @ShaunCorbs with your id and Gas Safe number.

I am gas safe and have given my gas safe number to Shaun. He gave me the link to post my query for this page . Thanks

 

[ShaunCorbs]

Yep but as I said back in jan I think you need a few more posts pm me again when you get past the 10 mark

 

[rpm]

10? Is the bar lower now? Sure it used to be more posts before the hallowed doors opened.

 

[Riley]

10? Is the bar lower now? Sure it used to be more posts before the hallowed doors opened.

Well ideally more. It’s the 100 club for the arms

 

[rpm]

Well ideally more. It’s the 100 club for the arms

Well ideally more? What does that even mean. What did it used to be, 30-35?

 

[Riley]

More as in we don’t want people posting the minimum getting the answer they want then never setting foot on here again. It’s more about getting more pro contributers. It’s always been 10-15 posts minimum for gas safe forum plus gas safe details

 

[Jacko]

So you have to post on here, get no response / support for 10-15 times and then expect to continue to preserve on a site that’s potentially wasting your time......

 

[Riley]

So you have to post on here, get no response / support for 10-15 times and then expect to continue to preserve on a site that’s potentially wasting your time....

Your choice fella nobody is making you. I don’t think it’s much of a commitment to try and get some professional support on issues, it is free after all no one is asking you to subscribe or anything like that

 

[rpm]

So you have to post on here, get no response / support for 10-15 times and then expect to continue to preserve on a site that’s potentially wasting your time....

Outrageous isn`t it expecting you to spend time posting before you get the answer you want however looking at the long term benefit you will get access to the gas sub forum where there is a wealth of knowledge & experiance to help you out.
Your call whether it is worth it or not Jacko.

 

[Jacko]

I am sure it’s worth it, I just think a prompt valuable service to new members will encourage them to use the site more as opposed to getting nowhere for the first 10-15 posts...... what am I supposed to post? Can anyone remind me how to do a tightness test, it’s just slipped my mind!!!!!

 

[Riley]

Introduce yourself - there’s a sub forum.
Maybe help a couple of public posters, it is give and take here. You don’t have to say much mate but I’m sure you can appreciate we get some people come on here post once, not necessarily gas and we never hear from them again. Any way it’s fairly inconsequential now as you’ve posted and got your numbers up, see how easy that was. Please send me @Harvest Fields or @ShaunCorbs an image of the front and back of your GS card and we’ll arrange access.

 

[Jacko]

Replied with ID but no introduction.
Gas engineer from 2006 majority work in boiler maintenance servicing and repairs.
My dad was a plumber heating engineer and an electrician in the days when their was no qualifications needed and whether I liked it or not had to help him..... it put me in good stead in the trade I am in now......

 

[Riley]

Good man. As I say, PM one of us your card and we’ll get it sorted for you