main diverter

[Mpb-10]

ive only been gas registered a year, an just starting to tackle some fault finding. im swapping just the actuator on the diverter on a main combi 30 eco. is it a dry pocket? or do i need to drain down, what is the best way?

thanks guys

 

[diamondgas]

Dry pocket Mpb-10 ... should have a pull out clip in the brass body of the valve that holds the actuator in place

 

[mutley racers]

don't forget to pack it with grease. I am wanting some of this grease but not sure what its called?

 

[diamondgas]

don't forget to pack it with grease. I am wanting some of this grease but not sure what its called?

Silicon Grease is what i know it as

Not a bad idea to put a bit on the valve spindle

 

[Simon F]

don't forget to pack it with grease. I am wanting some of this grease but not sure what its called?

is this what your after
REGIN HEAT SINK COMPOUND 25G REGZ20 on eBay!

Heat Sink Compound ? Buy Heat Sink Compound Online at BHL

 

[stevetheplumber]

is this what your after
REGIN HEAT SINK COMPOUND 25G REGZ20 on eBay!

Heat Sink Compound ? Buy Heat Sink Compound Online at BHL

no thats not what you want heat sink is for surface contact on stats and some thermistors same stuff that you put on heat sink blocks in computers