Main multipoint FF water heater

[Jacko]

Hello All
Problem with the above named water heater.
Red light comes on every 4-5 secs. No hot water operation. When you reset the heater the green light comes on briefly and then the red light starts doing it’s thing?????
Any ideas ?

 

[AMGasServices]

Hello All
Problem with the above named water heater.
Red light comes on every 4-5 secs. No hot water operation. When you reset the heater the green light comes on briefly and then the red light starts doing it’s thing?????
Any ideas ?

Hi,

I’ve attached the fault finding diagram for the main multipoint ff.

Using the diagram you’ll be able to sort it.

Please update us.

 

[Jacko]

Hi,

I’ve attached the fault finding diagram for the main multipoint ff.

Using the diagram you’ll be able to sort it.

Please update us.

View attachment 37837

Thank you however I have seen that but my fault is not shown there????

Hi,

I’ve attached the fault finding diagram for the main multipoint ff.

Using the diagram you’ll be able to sort it.

Please update us.

View attachment 37837

 

[Harvest Fields]

Red LED blinks?

 

[Jacko]

Thank you however I have seen that but my fault is not shown there????

Red LED blinks?

red light comes on for 3 seconds goes off for 3 seconds

 

[AMGasServices]

Thank you however I have seen that but my fault is not shown there????

Going by the diagram it says if the red light blinks you’ve got any issue with the boiler overheating check the over heat stat and replace if necessary.

 

[Jacko]

Going by the diagram it says if the red light blinks you’ve got any issue with the boiler overheating check the over heat stat and replace if necessary.

Overheat stat has continuity???? I assume it’s a make and break stat ?

 

[Jacko]

Update fault is with the pcb..... 3 year old water heater cost of the pcb £500........wtf

 

[Gasmk1]

where did you get that price from

 

[Gasmk1]

i get the feeling although you can still buy them that the heater may be obsolete searching on plumbase and wolesley there are no drawings for parts. lots of refubished boards out there though

 

[Jacko]

Wolseley group ...... it can’t be obsolete only 3 years old, the aps is £165 overheat stat £65 and the temp sensors £35 all plus vat ....... absolutely shocking prices...... may have to go with a refurbished board.....