mains fed hot water instal question.

[robdalton]

hi all,
i plan to install said hot water system and i have a worcester 24si system boiler and i just got a range 180 ltr pre plumbed tank cheap . the system boiler has a pump and so does the tank could i leave both pumps in system connected up to power etc if both left on lowest setting do you forsee any probs or would i be beter to remove one of the pumps.
cheers in advance for any advice help given
rob

 

[stevetheplumber]

no need for two pumps

 

[fuzzy]

by pre plumbed tank, do you mean a unvented hot water cylinder? do you know how to fit them and what all the parts do?

 

[robdalton]

hi,
yes i mean a pre-plumbed stainless steel unvented tank with expansion vessel etc. i know what the parts are etc just wondered if i would get away with leaving both pumps in rather than butchering nice tidy tank or fitted boiler. even if one pump ran at a time and i cycled them annually

 

[fuzzy]

ok hope your ok with it, just that with you calling it a 'tank' makes me concerned as to if you have your unvented ticket or not