Mains hot water cylinders

[Blackrod]

I'm in the process of fitting out a new airing cupboard and replacing our old open vented ho****er system,
and I am considering using a main pressure hot water cylinder, any one had any ploblems before I commit £500 +
Thanks
Regards

 

[TBServices]

I'm in the process of fitting out a new airing cupboard and replacing our old open vented ho****er system,
and I am considering using a main pressure hot water cylinder, any one had any ploblems before I commit £500 +
Thanks
Regards

You'll have a problem if you try fitting it yourself. They're complex and potentially dangerous if fitted incorrectly. You really need to be qualified to fit one safely.


Sent from my iPad using Tapatalk HD

 

[diamondgas]

Need good mains cold water supply.......! Preferably 20mm plus!

Need a means to accommodative the safety discharge pipe!!

And you need someone qualified to install commission and register the installation with the local authorities!

 

[gastec]

Hello they are the best for hot water due to the high pressure, and i agree to the other posts on this thread they can be very dangerous if fitted wrong and you need a good incoming water pressure. You only get out what you put in!!!!

 

[acecharly]

And, just incase your still not sure maybe you should take a look at this.....

Water Heater Blast - YouTube

 

[snowhead]

And, just incase your still not sure maybe you should take a look at this.....

Water Heater Blast - YouTube

I prefer the Mythbusters one, skip to 1 min 30;


Mythbusters Water Heater Explosion - YouTube

 

[TBServices]

I prefer the Mythbusters one, skip to 1 min 30;


Mythbusters Water Heater Explosion - YouTube

Haha, my tutor at college showed us this to stress the importance of unvented safety


Sent from my iPad using Tapatalk HD