manual rad' system flush | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss manual rad' system flush in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
P

paulga

Hello all,

I'm doing my first 9 radiator system manual flush next week on a gravity system in a bungalow, any advice on best/quickest way of doing it ?, i have had the cleaner fluid in for a week now already and i'm not sure what is the best way to tackle it, ie: take all rads off first and flush pipe runs or leave all rads on and flush system or shut all rads off then open one at a time ?
I would of course like to buy a power flusher but i'm going to have save up!.

P.S Any advice on pricing for the job.

Thanks in advance for any feed back.
 
Why not rent a machine, think you can get one for around £60 a day.
 
If you have allready put some cleaner in isn't it a bit late to think of pricing for the job? :confused:
 
Status
Not open for further replies.

Similar plumbing topics

Hi I have recently bought a house which is 17...
Replies
0
Views
607
  • Question
In a nutshell, a TT test will only tend to...
Replies
15
Views
2K
Thanks :) . A happy new year to you!
Replies
23
Views
1K
Hi All This is following on from thread I...
Replies
0
Views
633
Very informative...........thx🙄
Replies
3
Views
646
Back
Top