I have a cast iron radiator in my living room that I have noticed has been heating unevenly, (hot at top and cold at bottom), I am thinking that the radiator needs flushing?
Although the radiator is extremely heavy so removing it will be a big task and i don't really want to remove the reducing bushes as it was a nightmare to fit them, ended up using boss white and hemp.
Is it possible to flush the radiator leaving the radiator in place? There are two easily accessible T's which i can disconnect the pipework from can i apply a flow at one end and from the return run a hose to outside and just keep the radiator valves open?
I hope that makes sense,
Thanks
Although the radiator is extremely heavy so removing it will be a big task and i don't really want to remove the reducing bushes as it was a nightmare to fit them, ended up using boss white and hemp.
Is it possible to flush the radiator leaving the radiator in place? There are two easily accessible T's which i can disconnect the pipework from can i apply a flow at one end and from the return run a hose to outside and just keep the radiator valves open?
I hope that makes sense,
Thanks