Mapp gas? | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Mapp gas? in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
D

Dannyparty92

Last year I purchased a blow torch from b and q and it said on the box it come in suitable for blue cylinders. Would it be ok to use map gas with the blow torch or will I have to buy a different head only suitable for map gas?
 
was in a go system brass torch? if so there ok to use mapp.

post a picture, some diy lamps are not supposed to be suitable for mapp due to the higher temp and flame picture.
 
Status
Not open for further replies.

Similar plumbing topics

What about a metal blanking plate?
Replies
5
Views
858
    • Like
  • Question
There's a rather excellent guide to the...
Replies
5
Views
7K
You could try greasing the spindle of the gas...
Replies
1
Views
607
  • Locked
Still being called spammy by the forum filters...
Replies
8
Views
1K
  • Question
Photos of the cylinder which is located in...
Replies
4
Views
1K
Back
Top