Max flow rate | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Max flow rate

Post thread

Discuss Max flow rate in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
H

helpsy

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,754
What would be max flow rate of a Part 2 float valve?
 
only the manufacturer could prob tell you that i would think. why what you up to?
 
Just trying to have some data for a customer who is emptying their Fortic cylinder.
 
Was thinking if I was able to put my Weir cup under the outlet. Some muppet who fitted it has left minimal access though.
 
Status
Not open for further replies.

Similar plumbing topics

U
  • Question
Low flow rate (5L/min) at electric shower, 30L/min at stopcock
Sounds to me that the 15mm pipe that you are...
Replies
14
Views
1K
Essaboy
E
U
  • Question
Very handy flow rate/pressure/bore diameter calculator
I was looking into a problem with flow rate in...
Replies
0
Views
469
UserSteve
U
B
  • Question
Problem with flow rate upstairs only
It could be best to get him back to have a look
Replies
24
Views
2K
ShaunCorbs
ShaunCorbs
E
  • Question
Hot water low temperature and pressure. (Diagram and data provided).
Tbh no sounds about right for a 30kw boiler...
Replies
5
Views
736
ShaunCorbs
ShaunCorbs
J
System or Heat Only Boiler
Any gas boiler's HEX can stand a static head...
Replies
16
Views
1K
John.g
J
Back
Top