mico bore heating pipes clipes to breeze block before dot and dab plasterboard | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss mico bore heating pipes clipes to breeze block before dot and dab plasterboard in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
910
is duct tape ok for corrosion protection on micro bore central heating pipes clipped to breeze block walls before dot and dab plasterboard
 
No............ but for some reason people do it and wonder why it can leak later on due to corrosion
 
its no but dont forget about expansion and contraction will need a bit of space
 
Will not rot, but will creak amd groan when expanding. 10mm plastic coated all the way.
 
Status
Not open for further replies.

Similar plumbing topics

Hi all, Pipe moved...Temporarily fed back...
Replies
5
Views
732
In my opinion it's OK to have soldered joints...
Replies
3
Views
6K
My flexi idea was tongue in cheek daz...let us...
Replies
9
Views
2K
They can stick quite easily, try a spray with...
Replies
4
Views
770
  • Question
You may well be able to poke down a new bit of...
Replies
12
Views
3K
Back
Top