Microbore Manifolds | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Microbore Manifolds in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

ISM

Plumbers Arms member
Plumber
Gas Engineer
Messages
48
Where are the manifolds normally located, near the boiler, under the airing cupbaord???

I believe there are normally two. one you upstairs and one down stairs.
:confused::confused::confused:
 
I've found them in the down stairs toilet with the airing cupboard up stairs...... took me an age to find the things:eek:
 
Status
Not open for further replies.

Similar plumbing topics

Ah, I see so the flow is on one side, and the...
Replies
3
Views
1K
Hi folks, thought I's just close this out with...
Replies
19
Views
2K
They can stick quite easily, try a spray with...
Replies
4
Views
774
  • Question
Yep thats right. The other common block place...
Replies
3
Views
931
  • Question
This will probably work, it's 50mm outside...
Replies
9
Views
1K
Back
Top