P
peterdarlison
HI all
I have a micron 50FF on a W plan system.
It fires up and heats the water , then changes to heating.
However recently when it stops and starts up again to go through the firing procedure it comes up as fault .
The reset light is flashing and the burner light flashes too but slower.
If I turn off the heating and switch back on it sometimes fires up ok and sometimes it takes a few times to work.
I had a new APS fitted maybe 18months ago.
Please help its driving me mad!!!!
Peter from leicester
I have a micron 50FF on a W plan system.
It fires up and heats the water , then changes to heating.
However recently when it stops and starts up again to go through the firing procedure it comes up as fault .
The reset light is flashing and the burner light flashes too but slower.
If I turn off the heating and switch back on it sometimes fires up ok and sometimes it takes a few times to work.
I had a new APS fitted maybe 18months ago.
Please help its driving me mad!!!!
Peter from leicester
