Mini pipe bender | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Mini pipe bender in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

bennythedip

Gas Engineer
Messages
162
Just wondering if anyone can recommend a decent mini pipe bender for mostly 10mm pipe. I have a nasty cheap one that just mangles the pipe as much as bends it! I would rather spend a bit and get a decent one as I've started doing a lot of hob installs recently. Thanks for any help.
 
Look for the Rothenberger ratchet one on eBay. You can get them brand new, but they are expensive.
They do last though, had mine for at least 18 years.
ROTHENBERGER MINI PIPE BENDER - 6 , 8 AND 10 MM TUBE BENDER NOT RIDGID REMS
image.jpg
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Depending on what size/type your existing rad...
Replies
5
Views
952
I've tidied up this thread and banned a user...
Replies
2
Views
746
External I have a rems swing set that goes...
Replies
3
Views
1K
Hi mate i did a fast track MLP course it was...
Replies
1
Views
677
  • Question
That's fine. The latter. The black one is...
Replies
22
Views
1K
Back
Top