Minimum Water Pressure / Flow Rate | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Minimum Water Pressure / Flow Rate in the Bathroom Advice area at Plumbers Forums

Dan Masey

Gas Engineer
Messages
219
Iv been called back to the same property several times in the last 6 for the same problem. The tenant is complaining her water pressure is very poor. So this time i decided to do a proper test and found a Pressure of just under 2bar and a flow rate on the kitchen cold tap of 15Litres per minute. The main problem is when 2 or more appliances are trying to run at the same time. ie shower / washing machine.

Anyone know the minimum legal requirements?
 
yes that pump is upto 12lpm, anything above must have a break tank.

as mike said its normally 0.9bar and a very low flow and thats at the stop tap at the roadside i believe.

is it a combi boiler fitted?

what you could consider doing its fitting flow restrictors at the outlets to help even the flow rates maybe. they would be better of with a open vented hot water system i guess if its such an issue for them.
 
Last edited:

Similar plumbing topics

  • Question
Sorry for the delay in replying, I had an...
Replies
12
Views
968
  • Question
It could be best to get him back to have a look
Replies
24
Views
2K
  • Question
I was looking into a problem with flow rate in...
Replies
0
Views
469
L
  • Question
You need a mcalpine V33WM, the site won't let...
Replies
7
Views
810
  • Question
I’d look no further than an unvented. If you...
Replies
2
Views
2K
Back
Top