Hi guys, new to this forum, was looking for advice regarding a mira flight shower tray i've just installed [diy]. After installing it, and then taking a shower, i noticed that the water was collecting at the edges and not dispersing away after a period of time.
Now this tray was a replacement for a previous tray that was sent to me but was damaged in transit. i still have that damaged tray in my front garden, so i checked the edges of the tray, and they slope away from the tray basin in the direction of the enclosure or walls if you like. So i then went to the tray thati've fitted, removed the enclosure and the installed tray is the same, i.e sloping towards the walls and glass enclosure. Surely that is not the way the edges should slope, i would have thought the edge would slope towards the drain, have any of yous came across that whilst fitting a mira tray ?
regards Gary
Now this tray was a replacement for a previous tray that was sent to me but was damaged in transit. i still have that damaged tray in my front garden, so i checked the edges of the tray, and they slope away from the tray basin in the direction of the enclosure or walls if you like. So i then went to the tray thati've fitted, removed the enclosure and the installed tray is the same, i.e sloping towards the walls and glass enclosure. Surely that is not the way the edges should slope, i would have thought the edge would slope towards the drain, have any of yous came across that whilst fitting a mira tray ?
regards Gary
