Missing bits for my wall hung toilet

[Meely1]

My plumber says I’m missing the bits that go into the back of the toilet (two small holes either side) he’s only fitted side fixing ones before he’s says. Anyone know what they are called. Unfortunately I bought from Victoria plum and they are no use

 

[oz-plumber]

Any pics?

 

[ShaunCorbs]

I’m guessing wall hung toilet and frame ?

 

[Meely1]

Yes it’s this toilet. I have an existing saneux frame already built in.

 

[rpm]

I’m guessing wall hung toilet and frame ?

Cor, you read the title header! 😂

 

[ShaunCorbs]

Yes it’s this toilet. I have an existing saneux frame already built in.

they come with the frame so I guess there in your old pan

 

[snowhead]

They'll be something like these, can't guarantee these will fit.

SP.UNI.014 - UNI Wall Hung WC Pan Fixings

UNI WH Pan Fixings For 66076, MAWH01

spares.saneux.com

 

[Chuck]

My plumber says I’m missing the bits that go into the back of the toilet (two small holes either side) he’s only fitted side fixing ones before he’s says. Anyone know what they are called. Unfortunately I bought from Victoria plum and they are no use

AFAIK, 'mounting studs' are the bits that are fixed to the wall frame. After they've been adjusted to the correct length, these are covered by 'stud caps'. The bits that go in the pan casting and that you tighten to hold the pan onto the stud caps are the 'mounting receivers'.

I'm not sure how standardised these terms are.