Mixer shower options? | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Mixer shower options? in the Showers and Wetrooms Advice area at Plumbers Forums

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,248
Hi all. What are my options for a mixer shower with a Y plan system? Shower pump?
 
think you are asking

gravity hot water from boiler to cylinder with no thermostatic control
central heating pumped ,controled by room stat and single motorised valve

hot and cold to shower from tank

pressure poor...you want to fit pump

no you can not as hot water unregulated ..will get to hot to supply pump

pump seals will fail and maybe motor....

j
 
Upvote 0
Could I just take a balanced cold from the tank so that both hot and cold enter the mixer at the same pressure(poor). Or is it a no go.
Yes you can. It is not ideal however but aqualisa and mira both do sjowers suitable for thos type of installation.

It may well be similar in cost to fitting a shower pump with a cheaper shower valve
 
Upvote 0
Unless your water is heated by solid fuel (unregulated heat source) a shower pump is perfectly fine. The only consideration is header tank size needs to be able to cope with supplying the pump
 
Upvote 0
think you are asking

gravity hot water from boiler to cylinder with no thermostatic control
central heating pumped ,controled by room stat and single motorised valve

hot and cold to shower from tank

pressure poor...you want to fit pump

no you can not as hot water unregulated ..will get to hot to supply pump

pump seals will fail and maybe motor....

j

If he has a y plan installed then it suggests a cylinder stat would be in operation also... Therefore a regular shower pump would be suitable
 
Upvote 0

Similar plumbing topics

  • Question
Mira 88 was another but I don't think it was...
Replies
2
Views
572
  • Question
dear all, i would like to wish you a happy new...
Replies
6
Views
1K
M
  • Question
OP what was it you were saying about marketing...
Replies
2
Views
650
  • Question
Is there a stop that prevents the spindle...
Replies
8
Views
511
  • Question
If you’re not comfortable in adjusting the...
Replies
2
Views
804
Back
Top