Mixer Shower Problem | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Mixer Shower Problem in the Showers and Wetrooms Advice area at Plumbers Forums

E

erp

I recently bought a property with a relatively new mixer shower. I've retained this and simply changed the exposed pipe and rose to concealed pipes behind the wall and a fixed arm. Now that i am in the property and actually using the shower i am finding that it starts really well, great pressure and temperature but after about 5 minutes the pressure drops to a dribble and comes back sporadically. I noticed this happened this morning when i tried to cool the temperature down a little. (although, i did do this after about 5 minutes so it may just have been coincidence)

Any ideas what the problem is? I asked a plumber yesterday but he wasn't sure. Any help would be greatly appreciated.
 
We've only tried to use the shower 3 times, and it's happened each time.

When we ran the pipes and connected it to the fixed arm we tested it to ensure it was working before enclosing it with pboard and tiles. It ran fine but we didn't leave it running for a decent amount of time. It's really frustrating because it works perfectly at the start then eventually dies out.
 
Upvote 0

Similar plumbing topics

  • Question
Is there a stop that prevents the spindle...
Replies
8
Views
507
  • Question
This might be of interest...
Replies
1
Views
596
  • Question
Oh nice. I will mention these thank you.
Replies
8
Views
1K
  • Question
Thanks Any thoughts on a shower system to...
Replies
4
Views
857
Back
Top