Mlcp fans

[Riley]

Morning all

using more and more mlcp now and would love recommendations on some tools. Specifically I’m looking for something to straighten lengths ranging from 16mm up to 25mm. Additionally what do people use for a nice tidy bend? I know you can do it by hand but sometimes a tidy offset is required.
cheers Matt

 

[ShaunCorbs]

Rems mlcp bender as for straightening

they do make a 16mm one but that’s it as 25mm would be hard to get right

 

[Riley]

Thanks Shaun I’ll have a look. I agree re 25mm but could do with something for 16/20mm

 

[ShaunCorbs]

Kwix UK - Buy Now

www.kwixuk.com

Upto 16mm

might be worth an ask if they would do a 20mm one I would be up for one aswell

 

[Riley]

I’ve asked mate. Will let you know.

 

[Scott_D]

External bending springs are helpful

 

[Riley]

Any recommendations?

 

[Scott_D]

Any recommendations?

I got a ‘tool kit’ the last tine I used Uponor mlcp.
Bending springs, reamer and ratchet pipe cutters all made by Uponor.

 

[Riley]

You bought or freebie

 

[Scott_D]

It was all supplied. I guess they must have paid for it.

 

[Riley]

Ante I’ll give em a nudge. No one seems to offer a proper accessories option unless you buy it up front

 

[SimonG]

What about U heat on here?

 

[Riley]

And I did think that Simon so I contacted them I was of the impression they only did underfloor heating, but no they do offer the full MLCP experience as well, I spoke with Jake who was very very helpful