Mobile Home Install

Status
Not open for further replies.
C

chelsea

not had a look at my books yet but can anyone give me the basics on regs for installing a boiler in a static mobile home

never installed in a mobile home before so i guess there must be a few changes
 
Pretty sure regs are the same as in a house as it's a static van and not touring.
 
As James says, regs are the smae if it is a RPH and not a LAV.

Graham
 
the reason i ask is the walls are as thin as anything,not sure it can take a combi without reinforcing,what is the best material to use ?
 
You won't be able to hang a combi from the walls of a mobile home without sheeting it with something.
Use a bit 18mm ply screwed to at least one of the uprights. You may need to cover the ply with masterboard or similar depending on the boiler MI's
 
May restrict combi choice to a light weight one. I should imagine, biggest problem is getting the walls to hold the weight.
 
Status
Not open for further replies.

Featured Content

Back
Top