Anyone coming across these tap fixing components. I'm struggling to find a box spanner to fit. The nut is about 33-34 mm between flats. New install and as far as I can see nothing apart from a box spanner will tighten this. Unless you have the opportunity fit before installing sink.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Monobloc kitchen mixer 32mm back nut - spanner in the UK Plumbers Forums area at Plumbers Forums
- Messages
- 34,632
- Solutions
- 1
Deep socket
- Messages
- 21,026
Sounds like a ****o.
Don't think so, not enough room anyway. I did eventually find a 34mm/40mm box. I wasn't sure the sockets would be deep enough. They are pricey also. Thanks for the suggestions. Waste of time as the tap is sh......te a cheap Flexi pull down mixer. I've no doubt it will be replaced before long -
Similar plumbing topics
- Question
The shrouds are generally constructed of...
- SteveE
- UK Plumbers Forums
- 16
- 4K
- Latest:
- heeleyc
- Question
That fitting goes onto 15mm pipe. Not what I...
- sp1990
- General DIY Plumbing Forum
- 4
- 1K
- Latest:
- Ben-gee
- Question
Thanks!
The bath is 1 metre deep (I.e. front...
- GeoffG
- UK Plumbers Forums
- 8
- 3K
- Latest:
- GeoffG
- Locked
No worries mate. If that is the way you would...
