Multi-fit connection for 38mm chrome waste pipe?

[kristeva]

Hi all,

I'm in the process of fitting my freestanding bath. The supplied waste chrome pipe that runs into the floor is an unusual diameter - 38mm (European?). The bath came with a PVC multi-fit coupler to connect this chrome pipe to standard plastic waste pipe but its to long once I get under the floorboards as I can't achieve the fall. Does anyone know where I can find a multi-fit 90 degree bend which can accommodate 38 - 40mm? Cheers.

 

[ShaunCorbs]

Mcalpine has the adapters

90° Bend CP Brass x ABS Connector | McAlpine Plumbing

Achieve secure connections with the 90° Bend Cp Brass x Abs Connector, ensuring durability and reliability in your plumbing system.

mcalpineplumbing.com

 

[kristeva]

Mcalpine has the adapters

90° Bend CP Brass x ABS Connector | McAlpine Plumbing

Achieve secure connections with the 90° Bend Cp Brass x Abs Connector, ensuring durability and reliability in your plumbing system.

mcalpineplumbing.com

I assume its the 1 1/2" x 43/43 adapter I need?

The other one is too small.

 

[ShaunCorbs]

Yes all bath pipework would be 11/2 discharge

 

[kristeva]

Mcalpine has the adapters

90° Bend CP Brass x ABS Connector | McAlpine Plumbing

Achieve secure connections with the 90° Bend Cp Brass x Abs Connector, ensuring durability and reliability in your plumbing system.

mcalpineplumbing.com

Neither of these work.

Anyone else got any suggestions?

 

[ShaunCorbs]

Have you tried using one of the washers from the coupling in the mcalpine ?

 

[ShaunCorbs]

Might be best replacing it to uk stnd size eg

Orchard Roll top bath chrome trap & waste pipe

Click here to find out more about Orchard Roll top bath chrome trap waste pipe

victoriaplum.com

 

[kristeva]

Have you tried using one of the washers from the coupling in the mcalpine ?

Yeah, Ive got both here - 42/43A and the 32/35A - either too small or too big. I haven't got the multi-fit coupler that came with the kit on me, its back at the house. I'll try the washer that came with that.

This doesn't have to be a chrome fitting btw, it'll be under the floor. There must be something out there. I'll also ask the seller tomorrow.

 

[kristeva]

Might be best replacing it to uk stnd size eg

Orchard Roll top bath chrome trap & waste pipe

Click here to find out more about Orchard Roll top bath chrome trap waste pipe

victoriaplum.com

Yeah, £70 I'd rather not spend bearing in mind I already paid for waste, and who knows if it will fit the bath lol. The technical drawing on the sellers website with the dimensions is too low rez to make out, another reason to moan at them.

 

[ShaunCorbs]

Flexible Elbow 1 1/2" (50-40mm)

Flexible Elbow 1 1/2" (50-40mm)

www.tradepipes.co.uk

 

[kristeva]

Flexible Elbow 1 1/2" (50-40mm)

Flexible Elbow 1 1/2" (50-40mm)

www.tradepipes.co.uk

Thanks, I'll give that a go. They'll be access from the ceiling below as i'm planning on having a little access panel.