Multi toolsy | Plumbing Tools | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Multi toolsy in the Plumbing Tools area at Plumbers Forums

I have the corded Fein multi tool which is the tool less blade change (you just flick a lever to unlock the blade). I got the full kit version, as it is worth the extra few pounds for all the kit.
Don't get a cordless multi tool, unless you are going to do very tiny jobs where cables are a problem, like on roofs.
 
My mate bought the Bosch cordless multisaw, and he's not happy with it. I have the corded one which is cheaper, and it's great. Fein invented the tool, and owned the patent until it expired recently. That's why Fein used to be the only people who could make them, and charge a lot for the privilage.

I've used both the Fein and my Bosch. There's a bit of a difference, but there's no way I'd pay the extra to get a Fein. It's a big difference.
 
Lidl do a corded multi tool (think under the name Parkside).
It comes with assorted blades. It was about £30, which has to be a bargain as the blades are costly alone!
If you only need to use one for just the odd time, this is at a throw away price.
Trouble is, Lidl sell out of them straight away, so get in early on the day.
 
Last edited:
Lidl do a corded multi tool (think under the name Parkside).
It comes with assorted blades. It was about £30, which has to be a bargain as the blades are costly alone!
If you only need to use one for just the odd time, this is at a throw away price.
Trouble is, Lidl sell out of them straight away, so get in early on the day.
yeh! i got one of those.
not used or even looked at it yet (probably a brick in the box?). but got it just in case i need one.
sods law, i went to my local trade warehouse and there doing 'einhell' ones for £16.99. and there stuffs not bad from previous experience of cheapies.
 
yeh! i got one of those.
not used or even looked at it yet (probably a brick in the box?). but got it just in case i need one.
sods law, i went to my local trade warehouse and there doing 'einhell' ones for £16.99. and there stuffs not bad from previous experience of cheapies.

Always a downer when you discover you could have had a better deal!
Parkside tools from Lidl are actually Einhell tools (says on the booklet with them), but, as you would expect, they are probably made in China. What I think of multi tools is that most people will only need them for wee jobs, like cutting a skirting in situ or a floorboard on top of a joist, or plywood wall panel, so only going to get a few minutes work.
 
too right, came in a nice tool box as well for £17+!!

got it for odd bit of laminate and chopping hard to reach pipes etc.
had it a month and still not been out the box, but for the price you never know!
 
I have had the Bosch DIY version (in the green box) for three years . I install loads of bathrooms and it gets used on every job. It has got me out of lots of scrapes. However it has always felt like it is struggling. My electrician has a Fein which I tried a couple of weeks ago. It was in a different league and felt like a professional tool. I like the tool free blade change - the Bosch needs an Allen key.

I think my crimbo present to me might be a Fein

The blades are expensive, but they pay for themselves in the time they save.

I have tried blades from Saxton which are cheaper and seem to last nearly as well.




Sent from my iPad using Tapatalk HD
 
I have had the Bosch DIY version (in the green box) for three years . I install loads of bathrooms and it gets used on every job. It has got me out of lots of scrapes. However it has always felt like it is struggling. My electrician has a Fein which I tried a couple of weeks ago. It was in a different league and felt like a professional tool. I like the tool free blade change - the Bosch needs an Allen key.

I think my crimbo present to me might be a Fein

The blades are expensive, but they pay for themselves in the time they save.

I have tried blades from Saxton which are cheaper and seem to last nearly as well.




Sent from my iPad using Tapatalk HD
using saxton blades at the moment they are very good
 
I bought a cheap cordless one from b&q it has had a hard life now the amount of types it has got me out of the s**t but now the battery keep popping out, I used my mates fein one I think it's time for a new one
 
This is the best multitool i've ever come across. It will go through anything :wink:
 

Attachments

  • hae316c.jpg
    hae316c.jpg
    5.4 KB · Views: 40

Similar plumbing topics

The Fluke 116 tests for micro amps, which is...
Replies
7
Views
726
  • Question
I have a Dewalt flexible shaft bit-holder...
Replies
8
Views
997
  • Question
Thanks, I'll give that a go. They'll be access...
Replies
10
Views
2K
D
  • Question
Has the world gone crazy, tool prices So, a...
Replies
0
Views
184
Dustydazzler
D
  • Question
Thanks for your reply Basher. I played the...
Replies
9
Views
2K
Back
Top