My Main boiler has no pressure

[Beckih]

Hello, I have just bled all my radiators in my flat and now I have no pressure on my boiler, it's flashing and showing a 🔧 sign, please help I need heating tonight.

 

[Deleted member 120897]

Hello, what boiler is it? (I’m thinking Vaillant with the spanner sign). Your looking for an internal loop, an external loop, or if you’ve one installed a Jepp valve/similar. A Photo (under the boiler) may help.

 

[Beckih]

 

[Deleted member 120897]

Ok, firstly have a look under the boiler, behind that boxing in (looks like it’ll just pull out). Post another photo if you’re unsure of what to look for.

 

[Beckih]

iv taken the whole box off

 

[Deleted member 120897]

Now you have found the filling loop - it’s an internal one with 2 blue handles. One going across the pipe and one pointing down, on the right hand side. Open one up, then slowly open the other one and raise the pressure to just over 1 bar.

 

[Beckih]

Now you have found the filling loop - it’s an internal one with 2 blue handles. One going across the pipe and one pointing down, on the right hand side. Open one up, then slowly open the other one and raise the pressure to just over 1 bar.

done! Thank you so much

 

[Deleted member 120897]

View attachment 64700done! Thank you so much

You’re very welcome.

 

[Frelon]

.......and then close them both when you have reached the required pressure!