Mystery industrial Valve type?

[Glastowolf]

Anyone recognise this industrial brass valve (see pics attached)

? I inherited about 50 of the things, and would hate to end up sending them for scrap. Im hoping they are worth a few bob!

Male connector is tapered, from about 30mm down to approx 25 mm, and female connector is about 22mm internal diam.

Any ideas would be most welcome!

John

 

[Chalked]

Looks
Ike a steam control valve to me.

 

[king of pipes]

90 degree globe valve . kop

 

[leelister6]

They are valves from oxygen cylinders, the logo is Air Products.
Don't know what you could use em for or who would buy em.

 

[Glastowolf]

They are valves from oxygen cylinders, the logo is Air Products.
Don't know what you could use em for or who would buy em.

Thanks very much for feedback. Ile check out Air Products range. Just need to be able to describe them accurately on ebay! Cheers guys!

 

[ShaunCorbs]

Thanks very much for feedback. Ile check out Air Products range. Just need to be able to describe them accurately on ebay! Cheers guys!

scrap tbh thats all there good for

 

[Glastowolf]

scrap tbh thats all there good for

You think so? Cant find any for sale thats for sure. Might try and sell one and see how it goes. Seems a real shame to have to scrap them, but lots of brass should translate into a few beer tokens!

 

[oz-plumber]

You may even get bonus beer tokens if you remove the plastic handles.
Clean brass v dirty brass

 

[fixitflav]

Anyone recognise this industrial brass valve (see pics attached)View attachment 33496 View attachment 33497 ? I inherited about 50 of the things, and would hate to end up sending them for scrap. Im hoping they are worth a few bob!

Male connector is tapered, from about 30mm down to approx 25 mm, and female connector is about 22mm internal diam.

Any ideas would be most welcome!

John

From the dimensions, I think it's 3/4"BSPT male (or R3/4 these days) x 1/2"BSP female (most likely taper so Rc1/2 but can't tell from dia given) if that's any help.

 

[Glastowolf]

Thanks mate. Found some good info also on airproducts website. Not so mysterious now!