A
akingpage
Hi Guys,
This is my first post on this site so "Hi". I am installing a worcester 37CDi in a warehouse unfortunately the closest the gas board can get the meter is on the other side of the warehouse which is 50 meters away! I am looking to size up the gas pipe but the table I use to work out my pipe sizes only goes up to 30 meters. Does anyone know of a pipe size chart that goes higher than 50 meter runs or can someone help me out with the calculation? specs are as follows:
Worcester bosch 37CDi = 3.9 m³/h (the only appliance on the system)
length from meter to the boiler = 60 meters ( have already piped up 10 meter in 22mm from the boiler)
Meter = u6 (not u16 meter as posted before)
bends = 6 elbows to the 22mm connection ( have already used 4 22mm elbows on the 22mm gas pipe from the boiler)
Any help would be much appreciated.
Thanks
This is my first post on this site so "Hi". I am installing a worcester 37CDi in a warehouse unfortunately the closest the gas board can get the meter is on the other side of the warehouse which is 50 meters away! I am looking to size up the gas pipe but the table I use to work out my pipe sizes only goes up to 30 meters. Does anyone know of a pipe size chart that goes higher than 50 meter runs or can someone help me out with the calculation? specs are as follows:
Worcester bosch 37CDi = 3.9 m³/h (the only appliance on the system)
length from meter to the boiler = 60 meters ( have already piped up 10 meter in 22mm from the boiler)
Meter = u6 (not u16 meter as posted before)
bends = 6 elbows to the 22mm connection ( have already used 4 22mm elbows on the 22mm gas pipe from the boiler)
Any help would be much appreciated.
Thanks
Last edited by a moderator: