Need a bit of guidence | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter ajsaville
  • Start date
  • Replies 2
  • Views 990

Discuss Need a bit of guidence in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
A

ajsaville

Hi All.

I need a little bit of guidence i know you can get replacement valves for taps but my problem is i have bath taps with the shower attachment on them.With the valve set for taps its fine but for the shower it just dribbles out.Is it possible to change the valve that diverts the water from taps to shower.

Alan.
 
Yes!

Easiest thing is to take the part to a Plumbers merchants and ask for spares. I would advise a big merchant company such as Plumb Centre or similar as they usually carry the biggest range of spares.

If you happen to know the make and model that makes things easier. But it can mean they will say they haven't any for that make. But if you take the part in, they might be able to get you a match even though the washers may not be the same make as the taps.

Don't be scared of looking a DIYer by taking the part in. Many professionals will probably tell you they have done it themselves.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Installing a P-shaped shower bath in a small...
Replies
5
Views
1K
  • Question
Sounds like there the wrong size ones worst...
Replies
7
Views
552
  • Question
does a standard tap refurb kit fit? they come...
Replies
1
Views
388
  • Question
Take it back to the shop.
Replies
3
Views
766
  • Question
Thanks, bought a couple of those and will give...
Replies
6
Views
931
Back
Top