Need help identifying the item and its issue...

[benthegreat]

Hi,

I have this shower fitted in my en suite. It's stopped working/responding entirely.

It was working then mid-shower it stopped and both buttons now flash slowly and don't respond to being pressed or held in any combination I've tried.

I'm after some help identifying the part so I can find out if I can fix/replace it or if I need to get a professional in to sort it.

Thanks in advance!

 

[ShaunCorbs]

Have you tried looking at the instructions under fault as it should tell you what’s the flashing for ?

 

[Best]

Aqualisa Quartz shower. That part is just the control - it has a pcb directly behind the buttons. Very easy to replace that entire control - just a single screw on base and a plug in cable.
But the Processor (main part of shower, remotely installed usually in attic or a cupboard) might be faulty and is expensive.
There are different models for combi boiler or gravity fed systems.

 

[Dan1990]

Your shower is an Aqualisa Quartz Digital. The speed/pattern of flashing represents a fault code and their helpline should be to tell you what may be wrong.

Shower service | Customer Services | Aqualisa | Aqualisa

We take pride in both our showers and our after sales service. Whether you need technical advice, spare parts or a service visit, call us!

www.aqualisa.co.uk

 

[Darren Jackson]

Switch off the power for 5 minutes, then press & hold down the boost button while someone else turns back on the power. It might take 2 or 3 attempts but it usually works to reset the unit.