Hi,
I am removing an old Honeywell thermostat and trying to install a new Drayton Digstat +3. However i cannot understand what wire needs to go where.
The old honeywell wires were as follows:
Brown wire in position 1 which is listed as live on the thermostat diagram
Blue wire in position 2 which is apparantly neutral
Yellow/green wire in posiion which is also apparantly neutral.
On the new thermostat I have 3 connections:
C = I believe the brown live goes here??
ON = I believe the blue neutral goes here??
OFF = I put the yellow / green here ?
Any ideas what this should be? when I try the above the fuse blows on the plug that powers the whole central heating electrics.
Thanks
Marc
I am removing an old Honeywell thermostat and trying to install a new Drayton Digstat +3. However i cannot understand what wire needs to go where.
The old honeywell wires were as follows:
Brown wire in position 1 which is listed as live on the thermostat diagram
Blue wire in position 2 which is apparantly neutral
Yellow/green wire in posiion which is also apparantly neutral.
On the new thermostat I have 3 connections:
C = I believe the brown live goes here??
ON = I believe the blue neutral goes here??
OFF = I put the yellow / green here ?
Any ideas what this should be? when I try the above the fuse blows on the plug that powers the whole central heating electrics.
Thanks
Marc